JConcepts Aluminum Servo Mount Bracket Blue RC10B7 B7D 5161-1
Brand : JConcepts
Category : Chassis, Drivetrain & Wheels > Suspension, Braking & Steering Parts
Condition
:
New
Domestic Shipping
:
$2.80
Domestic Return
:
Accepted within 30 days
International Return
:
Not Accepted
Item Location
:
NY, New York,
United States
Seller Information
The servo mount brace can be installed without any modifications or additional equipment in RC10B7 vehicles. The most recent design for the latest Team Associated vehicle incorporates a little extra room for servo mount lead on popular servos like the Savox and other similar models. With a sleek wrap-around design, luster of aluminum, and etched JConcepts.net logo, the brace adds consistency, performance tune-ability with aesthetic appeal. JConcepts is, World Proven Innovation and Design.
Installation notes -
To install, completely remove servo from vehicle and remove standard mounts. With the servo horn already in the correct position, align plastic shims or without as previously used on the servo. Install brace to each side and loosely fasten factory mounting screws with washers into the 4 locations and snug them. Now, center the servo between the brace and install the set screws on each side, use a light amount of thread locking compound (#8136) RM2 thread lock adhesive and snug them to touch off and keep the servo in place.
Completely clamp the 4 mounting screws on the front side to lock servo position. Remember to always use a light amount of thread locking compound when securing steel screws into aluminum. Reinstall the servo to vehicle and trim out and check EPA adjustments to complete assembly.
Features:
Installation notes -
To install, completely remove servo from vehicle and remove standard mounts. With the servo horn already in the correct position, align plastic shims or without as previously used on the servo. Install brace to each side and loosely fasten factory mounting screws with washers into the 4 locations and snug them. Now, center the servo between the brace and install the set screws on each side, use a light amount of thread locking compound (#8136) RM2 thread lock adhesive and snug them to touch off and keep the servo in place.
Completely clamp the 4 mounting screws on the front side to lock servo position. Remember to always use a light amount of thread locking compound when securing steel screws into aluminum. Reinstall the servo to vehicle and trim out and check EPA adjustments to complete assembly.
Features:
- JConcepts original design and function
- Machined aluminum, wrap-around concept
- Set screw-controlled centering feature
General Info
| Category | Chassis, Drivetrain & Wheels,Suspension, Braking & Steering Parts |
| Brand | JConcepts |
| MPN | 5161-1 |
| Condition | New |
| Location | NY, New York, United States |
Domestic Shipping
| Shipping cost | Each additional item | Service | Handling Time | Shipping To |
|---|---|---|---|---|
| $2.80 | $1.00 | USPS Ground Advantage | 1 business day | United States |
U.S. Domestic Territories Shipping
| U.S. Domestic Territory | Shipping cost | Each additional item | Service | Handling Time |
|---|---|---|---|---|
| Alaska/Hawaii | $3.50 | $1.00 | USPS Ground Advantage | 1 business day |
| US Protectorates | $2.95 | $1.00 | USPS Ground Advantage | 1 business day |
| APO/FPO/DPO | $2.95 | $1.00 | USPS Ground Advantage | 1 business day |
Domestic Return
| Return Duration | Who Pays for Return | Replacement or Exchange |
|---|---|---|
| 30 days | Buyer | Available |
International Return
Not Accepted
Ratings and Reviews
5.0
0 Reviews
5
0
4
0
3
0
2
0
1
0
0
%
Good Quality
0
%
Good Value
0
%
Recommit
Most relevant Reviews